| 点位编号 | S1 | S2 | S3 | S4 | S5 |
| 3d抗折强度(Mpa) | 4.4 | 4.6 | 4.5 | 4.6 | 4.7 |
| 28d抗折强度(Mpa) | 7.2 | 7.4 | 7.1 | 7.2 | 7.0 |
| 3d抗压强度(Mpa) | 23.3 | 24.2 | 23.8 | 23.6 | 24.0 |
| 28d抗压强度(Mpa) | 49.5 | 50.6 | 49.7 | 49.7 | 50.8 |